Elcome and Transfluid provide hybrid electric propulsion system for new Ribcraft Patrol boat
A new patrol boat just launched by Ribcraft in Dubai is powered by a unique hybrid electric system supplied by Transfluid and Elcome International.
The two companies collaborated to design and install the cost-effective diesel-electric system for the nine-meter Ribcraft professional-grade rigid-hull inflatable boat. A Middle Eastern customer required a Patrol RHIB intended for the surveillance of the environmentally protected areas with zero environmental footprint, while at the same time being able to operate at speeds in excess of 40 knots for safety and security missions.
Elcome was responsible for all aspects of specifying, integrating, installing, testing and commissioning the Transfluid hybrid system, which can operate in an electric-only, engine-only or booster mode. All systems and equipment on board were specified and designed in collaboration with Ribcraft’s team of technical designers and naval architects.
The system architecture, developed by Transfluid, incorporates a clutch and transmission that enables fast and seamless switching between modes. When the clutch is disengaged, the vessel runs solely on battery power, providing emission-free and silent running. When in “engine” mode, the clutch is engaged and the twin Volvo Penta D4 DPH diesels propel the boat and can also recharge the batteries if required at the touch of a button. In the “booster” mode, the battery-driven electric motor and diesel engines deliver maximum thrust for powertrain.
The boat can operate efficiently and silently in the electric mode when patrolling at slow speeds or in protected waters, and surge quickly to high-speed operation as needed.
The diesels can be brought online while running on electric power to recharge batteries as needed to extend the operating range. The lithium batteries can also be charged from a shore power connection when at the pier.
The completely integrated turnkey solution utilizes a proprietary electronic controller that communicates with all components through a CAN Bus protocol. The hybrid modules, batteries and electric motors are approved by DNV.
The three operational modes enable the boat operator to use smaller, less expensive and more efficient diesel engines, yielding substantial savings in fuel consumption and longer maintenance intervals without sacrificing performance. The system also provides more flexibility for boats operating in and out of environmentally protected areas, while delivering improved working conditions for the crew, with no diesel fumes or noise when running in the electric mode.
“The demand for marine electric and hybrid propulsion systems is growing rapidly worldwide, driven by growing awareness of environmental sustainability and a desire to reduce operational and maintenance costs,” said Jimmy Grewal, executive director of Elcome International.
“The diesel-electric hybrid system developed for the new Ribcraft patrol boat incorporates an easy ‘plug-and-play’design that can be cost-effectively installed on newbuilds or existing vessels,” said Gianluigi Taroni, sales director, Transfluid SpA.
“Transfluid and Elcome have been excellent partners for the Ribcraft 9.0 Patrol RHIB, and we look forward to further collaboration with their talented engineering and application teams on future projects,” said Adelina Florescu, business development manager, Ribcraft.
About Elcome International
Elcome was founded in 1970 and is one of the world’s largest maritime companies with a diversified portfolio of technologies, solutions and services. The company is headquartered in Dubai and maintains 24 offices in 11 countries extending from Europe to Southeast Asia, with a total of more than 500 employees. Elcome is the authorized sales and service representative for world-leading OEMs across defense, energy, marine and yachting industry segments and is also a leading system integrator responsible for many vital land-based, offshore and national security projects in the Middle East and Southeast Asia. Elcome also operates an FTA-approved training center and bridge simulator in Dubai and offers training and certification for operators and bridge officers.
About Transfluid
Transfluid was founded in 1957 and specializes in the production and design of large, medium and small power transmissions. Thanks to our skills and experience, today Transfluid has been able to create what are the products of the future, namely parallel hybrid transmissions and pure electric transmissions. We have started production of our permanent magnet motors, which complete the hybrid product and the pure electric product in the most complete way. Our hybrid and electric systems ensure maximum environmental friendliness in terms of both emissions and noise. With its extensive network of subsidiaries, service centers and distributors worldwide, Transfluid guarantees maximum reliability of its systems.
About Ribcraft
Founded in Great Britain over 30 years ago, Ribcraft has gained a world-class reputation as a leading global builder of professional-grade, custom rigid inflatable boats. With major contracts completed for clients ranging from the defence sector to police forces and commercial operators around the world, Ribcraft has invaluable knowledge and experience to truly bring customers’ concept to reality.
Ribcraft is unique as a global manufacturer in that all designs and construction for the entire RHIB are built in-house at purpose-built facilities, with hull sizes from 4.8 to 12.5m. This ensures total quality control of all aspects of the manufacture, offering high standard of finish and attention to detail. The Ribcraft facilities in the UK, USA and United Arab Emirates, have a team of experts onsite, who can take your concept to reality and are more than capable to accommodate individual requirements.
