ClassNK makes breakthrough finding for ultra-large container ships
ClassNK has concluded that the minimum required brittle crack arrest toughness for extremely thick brittle crack arrest steel plates of 100mm used in ultra-large container ships is 8,000 N/mm3/2. The technical expertise is a world-first and is based on verification tests carried out as part of a joint R&D project in collaboration with Japan Welding Engineering Society (JWES).
To enhance the structural reliability of large container vessels, IACS released its Unified Requirements on brittle crack arrest design for the use of extremely thick steel plates in January 2013, outlining the necessary measures to be taken for the prevention of brittle crack propagation in the event of occurrence of a crack.
The requirements state that brittle crack arrest steel plates with a thickness of 80mm or less must have a brittle crack arrest toughness value (Kca) of 6,000 N/mm3/2 or more at -10°C (the minimum design temperature for commercial vessels). However, there are no specific rules for cases where the thickness of brittle crack arrest steel exceeds 80mm. The required Kca value for brittle crack arrest steel plate with a thickness exceeding 80mm is to be specifically agreed with each Classification Society.
In order to clarify the required brittle crack arrest toughness value (Kca) for extremely thick steel plates exceeding 80mm,ClassNK carried out investigative research through a joint R&D project with JWES.
Verification tests were carried out by ultra-large-scale test specimens simulating the actual construction of the hatch side coaming and upper deck of ultra-large container ships as part of the joint R&D project. The results revealed for the first time that brittle crack arrest steel plates with a thickness of 100mm must have a brittle crack arrest toughness value (Kca) of 8,000 N/mm3/2 or more at -10°C.
Based on the results of these verification tests, and as part of its response to the ever-increasing size of the design and construction of container vessels, ClassNK will, in principle, require brittle crack arrest steel plates with a thickness of more than 80mm and not exceeding 100mm to have a brittle crack arrest toughness value (Kca) of 8,000 N/mm3/2 or more at -10°C, as the severest conditions. Furthermore, to enable the smooth use of extremely thick steel plates in the industry, it will endeavor to properly reflect the new finding onto the IACS Unified Requirements.
